S-shaped tone arm assembly with:
- Adjustable counterweight
- Anti-skate adjustment
- Tone arm height adjustment and lock
- Tone arm lift with hydraulic action and lift lever
- Tone arm rest with locking mechanism
Selectable +/-10% or +/-20% pitch adjustment ranges
Stroboscopic platter speed indicator
Forward and reverse play
Cast aluminum record platter with slip mat
Start/stop button with remote start/stop input
Pop-up stylus target light
45-RPM adapter with storage receptacle
Receptacle for extra headshell
Adjustable feet for leveling
Removable hinged dust cover
Includes professional cartridge ATP-2
AT-PL120 Specifications
Type 3-speed, fully manual operation
Platter Die-cast Aluminum
Motor DC
Drive Method Direct drive
Speeds 33-1/3 / 45 / 78 RPM
Pitch Variation +/-10% or +/-20%
Starting Torque >1.6 kgm-cm
Braking System Electronic brake
Wow and Flutter <0.2% WRMS (33 RPM)
Signal-to-noise Ratio >50 dB
Output Level
Pre-amp "Off" 2.5 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "On" 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-amp Gain 38 dB nominal, RIAA equalized
Pitch Output Output signal to drive remote pitch indicator
2.5V square wave signal
675 Hz +/- 1 Hz for 33 and 45 RPM quartz locked speeds
Varies from 540 Hz - 810 Hz when +/- 20% pitch is selected
Varies from 607 Hz - 742 Hz when +/- 10% pitch is selected
1170 +/- 1 Hz for 78 RPM
Remote Start/Stop 2 conductor 1/4" connector (T/S)
Normally open contact closure
Power 115/230V AC, 50/60 Hz, 13W
Dimensions 17.75" W x 6" H x 13.88" D
450 mm W x 157 mm H x 352 mm D
Net Weight 23.4 lbs. (10.6 kg)
Furnished Accessories Headshell/cartridge (ATP-2), AC line cord, 45 RPM adapter, operation manual
ATP-2 Cartridge Specifications
Frequency Response (Hz) 15 - 22,000
Channel Separation 23/17 (dB at 1 kHz/10 kHz)
Vertical Tracking Force (grams) 3.0 - 5.0
Stylus Construction Bonded round shank
Output 5.3 (mV at 1 kHz, 5 cm/sec)
Channel Balance (dB) 1.5
Stylus Shape 0.4 x 0.7 mil elliptical
Cantilever Alloy tube
Mount Half-inch
Replacement Stylus ATP-N2
